Side Profile Forming Machine
Material kind: PPGI, AL, CR steel
Material thickness: 0.4~0.8mm (PPGI, CR steel)
0.7~1.2mm (AL)
Raw material yield strength: 235~300Mpa
Raw material width: according with actual profile forming requirement
Final profile bottom width range: 150~1000mm
Bottom width standard adjustment: free adjustment (suggestion: had better use few confirmed width standards)
Description
Side forming machine technical parameter
1. Suitable material technical information:
Material kind: PPGI, AL, CR steel
Material thickness: 0.4~0.8mm (PPGI, CR steel)
0.7~1.2mm (AL)
Raw material yield strength: 235~300Mpa
Raw material width: according with actual profile forming requirement
Final profile bottom width range: 150~1000mm
Bottom width standard adjustment: free adjustment (suggestion: had better use few confirmed width standards)
 |
 |
 |
 |
2. Forming line component:
Decoiler
Decoiler car (optioned item)
Feeding guide device
Rib forming device (optioned item)
Main forming part of profile
Hydraulic cutter
Hydraulic system
PLC control system
Control cabinet
Final profile output rack
3. Line working speed: 10~15m/min
4. Suitable power source: 380V, 50Hz, 3Phase (440V, 60Hz, 3Phase)
5. Machine main body color: RAL5015
